CommunityData:Hyak Ikt (Deprecreated)

To use Hyak, you must first have a UW NetID, access to Hyak, and a two factor authentication token. Details on getting set up with all three are available at CommunityData:Hyak setup.

Setting up SSH

When you connect to SSH, it will ask you for a key from your token. Typing this in every time you start a connection be a pain. One approach is to create an .ssh config file that will create a "tunnel" the first time you connect and send all subsequent connections to Hyak over that tunnel. Some details in the Hyak documentation.

I've added the following config to the file ~/.ssh/config on my laptop (you will want to change the username):

Host hyak hyak.washington.edu
   User makohill
   HostName login3.hyak.washington.edu
   ControlPath ~/.ssh/master-%r@%h:%p
   ControlMaster auto
   ControlPersist yes
   ForwardX11 yes
   ForwardX11Trusted yes
   Compression yes

ONE WARNING: If your SSH connection becomes stale or disconnected (e.g., if you change networks) it may take some time for the connection to time out. Until that happens, any connections you make to hyak will silently hang. If your connections to ssh hyak are silently hanging but your Internet connection seems good, look for ssh processes running on your local machine with:

ps ax|grep hyak

If you find any, kill them with kill <PROCESSID>. Once that is done, you should have no problem connecting to Hyak.

Connecting to Hyak

To connect to Hyak, you now only need to do:

ssh hyak

It will prompt you for your UWNetID's password and your PRN which is the little number that comes from your token.

Setting Up Hyak

When setting up Hyak, you must first add this to your BASHRC file. Generally, you can simply edit the following file on Hyak: ~/.bashrc

##  hyak specific options
alias rgrep='grep -r'
alias big_machine='qsub -W group_list=hyak-mako -l walltime=500:00:00,mem=200gb -I'
alias any_machine='qsub -W group_list=hyak-mako -l walltime=500:00:00,mem=100gb -I'
PYTHON_PATH="/com/local/lib/python3.5:$PYTHON_PATH"
LD_LIBRARY_PATH="/com/local/lib:/com/local/lib64/R/lib:${LD_LIBRARY_PATH}"
PKG_CONFIG_PATH=/com/local/lib/pkgconfig:/usr/share/pkgconfig
MC_CORES=16
PATH="/com/local/bin:$PATH"
module load parallel_sql
module load contrib/gcc_5.1.0-openmpi_1.10.1
umask 007

The final line is particularly important. If you do not do this, the files you create on Hyak will be able to be read or written by others in the group!

Once you do this, you will need to restart bash. This can be done simply by logging out and then logging back in or by restarting bash with the command exec bash.

I also add these two lines to my Hyak .ssh/config:

ForwardX11 yes
ForwardX11Trusted yes

These lines will mean that if I have "checked out" an interactive machine, I can ssh from my computer to Hyak and then directly through an addition hop to the machine (like ssh n0652). Those ForwardX11 lines means if I graph things on this window, they will open on my local display.

Jupyter Notebook on Hyak

1. Choose a number you are going to use as a port. We should each use a different port and the number should be between 1000 and 65000. It doesn't matter what it is but it needs to be unique. Pick something unique. In the following instructions, replace $PORT with your number below.

2. Connect to Hyak and forward the the port from you local machine to the new one:

ssh -L localhost:'$PORT:localhost:$PORT username@hyak.washington.edu

You can also add the following line to the Hyak section on your local .ssh/config file on your laptop:

    LocalForward $PORT localhost:$PORT

3. We're going to need to connect to one of the compute servers twice. As a result, we'll use a program called tmux. Tmux is very similar (but a little easier to learn) than a program called screen. If you know screen, just use that. Otherwise, run tmux like:

tmux

You can tell you're in tmux because of the green line at the bottom of the screen.

4. "Check out" a compute node

any_machine

5.

Keep track of which machine you are on. It should be something like n0650 and it should be displayed on the prompt. We'll refer to it as $HOST below.

6. Start jupyter on the compute node:

jupyter-notebook --no-browser --port=$PORT

You'll see that jupyter just keeps running in the background. This can be useful because when there are errors, they will sometimes be displayed in this terminal. Generally, you can just ignore this though.

6. Create a new window in tmux/screen

At this point, you have jupyter running on the compute node on $PORT. You also will have forwarded the port from your laptop to the login node. We're really only missing one thing which is the tunnel from the login node to the compute node within hyak. To do this, we'll create a new window inside tmux with the keystroke Ctrl-b c.

If you're not familiar with it, you'll want to read the CommunityData:tmux which includes a quick cheatsheet. To switch back to the original window running jupyter, you should type: Ctrl-b 0. If you switch though, be sure to switch back to the new window with Ctrl-b 1.

Because you originally ran tmux on the login node, the new window/terminal will be opened within tmux on the login node.

7. Open a tunnel from the login node to the compute node.

 ssh -L localhost:$PORT:localhost:$PORT $HOST

8. In your local browser, localhost:$PORT

Set up a password for Jupyter Notebook on Hyak

Once you have IPython/Jupyter up and running on Hyak and have set up all the port forwarding stuff described above, you might consider adding a password to secure your Jupyter session. Why bother? Anyone with access to Hyak can see that you're forwarding something via the login node. While unlikely, they may do something to interrupt or otherwise mess with your session. It should work. Keep in mind that anyone with access to your jupyter session can do anything you can do on the command line including access all your data, delete files, etc.

Instructions for setting up a password on your Jupyter sessions are available on the Hyak wiki (UW login required).

Note that you can/should skip the first command that loads the canopy module.

Running Jobs on Hyak

When you first log in to Hyak, you will be on a "login node". These are nodes that have access to the Internet, and can be used to update code, move files around, etc. They should not be used for computationally intensive tasks. To actually run jobs, there are a few different options, described in detail in the itSigs documentation. Following are basic instructions for the two most common use cases.

Interactive nodes

For simple tasks, e.g. running R on a dataset, testing that code is working, etc. it is easiest to run it in an interactive node. This is a compute node that you interact with through the terminal. All of your disk storage is accessible just as though you were on the login node.

Parallel SQL

For big jobs you will want to use multiple nodes. Hyak has a very cool tool that makes this very easy, called Parallel SQL. Detailed instructions are in the itsigs parallel-sql documentation. There is also a full walkthrough example with instructions in the wikiresearch/hyak_example directory.

The basic workflow is:

1. Prepare the code, and test it with a single file (either on your computer, or on an interactive node). 2. Write a job_script file. This tells the node what job to run. There is an example on the Parallel SQL wiki page (linked above), and an example in the wikiresearch/hyak_example directory. 3. Create a task_list file. This is a list of commands that should be run, with one line per file that the command should operate on. An example file might look something like:

python analysis_script.py -i ./input/wiki_1.tsv -o ./output/wiki_1_analysis.tsv
python analysis_script.py -i ./input/wiki_2.tsv -o ./output/wiki_2_analysis.tsv
...

The README in the hyak_example directory has some example bash commands that you might use to generate this file.

4. Load the task_list into Parallel SQL.

$ module load parallel_sql
$ cat task_list | psu --load

5. Run the job_script on as many nodes as you need. When each task is finished, the node will get the next task from Parallel SQL.

$ for job in $(seq 1 N); do qsub job_script; done 
# N is the number of nodes

Killing jobs on compute nodes

Torque documentation suggests that you should do this with qdel. That might work, but apparently our system runs moab on top of torque and the recommended (by Hyak admins) way to kill a job is to use the mjobctl command.

For example, you might run nodestate from a login node to figure out the ID number for your job (let's say it's 12345), then run mjobctl -c 12345 to send a SIGTERM signal or mjobctl -F 12345 to send a SIGKILL signal that will bring job 12345 to an end.

Note that only four user accounts at a time can have the bits necessary to kill other people's jobs, so while you can do this on your own jobs, you'll need to bother the IRC channel to find help cancelling other's jobs (we think that Jeremy, Nate, Aaron, and Mako currently have the bits). Also, check out the documentation for mjobctl for more info.