CommunityData:Git: Difference between revisions

From CommunityData
(fix link)
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Wondering why this is a topic to care about? Check this [https://about.gitlab.com/topics/version-control | what is version control?] article.
Wondering why this is a topic to care about? Check this [https://about.gitlab.com/topics/version-control what is version control?] article.


== Getting Access to the CDSC Git Repository ==
== Getting Access to the CDSC Git Repository ==


If you need access to the CDSC Git Repository, you should ask on the [[CommunityData:IRC|#communitydata IRC channel]] for access. If you need access to a specific repository only, mention which one. While you likely already know which repo you want access to, you can find the public ones on [[https://code.communitydata.science/| code.communitydata.science]], and a complete list of all of them  <code>conf/gitolite.conf</code> file in the <code>gitolite-admin</code> git repository. If you are a new CDSC member, mention that you need to be added to the <code>@collective</code> group in Gitolite. Anybody in the collective who uses the Git repository will be able add you.
If you need access to the CDSC Git Repository, you should ask on the [[CommunityData:IRC|#communitydata IRC channel]] for access. If you need access to a specific repository only, mention which one. While you likely already know which repo you want access to, you can find the public ones on [https://code.communitydata.science/ code.communitydata.science], and a complete list of all of them  <code>conf/gitolite.conf</code> file in the <code>gitolite-admin</code> git repository. If you are a new CDSC member, mention that you need to be added to the <code>@collective</code> group in Gitolite. Anybody in the collective who uses the Git repository will be able add you.


== Install Git==
== Install Git==


To get started, you will need to '''install git'''. Doing so requires different steps depending on your operating system. Basic instructions available from [https://git-scm.com/downloads the Git website].  
To get started, you will need to '''install git'''. Doing so requires different steps depending on your operating system. Basic instructions available from [https://git-scm.com/downloads the Git website].  
Mac OS users should check out [https://www.moncefbelyamani.com/how-to-install-xcode-homebrew-git-rvm-ruby-on-mac/ this tutorial], which recommends also setting up the "Command Line Tools" as well as the "homebrew" package manager. If you follow the steps for installing git onto your machine, it is only necessary to do the first three (out of five). This includes downloading/installing the command line tools, installing Homebrew, and installing git itself.
Note that RStudio also has Git integration now. Instructions and details available via [https://support.rstudio.com/hc/en-us/articles/200532077-Version-Control-with-Git-and-SVN RStudio support documentation].


You will also likely need to set it up so it knows what your name and email address is. You can do that like:
You will also likely need to set it up so it knows what your name and email address is. You can do that like:
Line 20: Line 16:
Again
Again
</source>
</source>
Note that RStudio also has Git integration now. Instructions and details available via [https://support.rstudio.com/hc/en-us/articles/200532077-Version-Control-with-Git-and-SVN RStudio support documentation].


== Configuring Git for submodules ==
== Configuring Git for submodules ==
Line 50: Line 48:
=== Creating a new repository ===
=== Creating a new repository ===


To create a new repository, you will need to have admin rights. Currently, the administrators are Kaylea, Nate, Jeremy, Aaron, Mako, Sayamindu, and Jim. If you'd like to be an administrator, you should contact one of them!
To create a new repository, you will need to have admin rights. Currently, everyone in the collective group is an administrator.
 
If you are all already administrator, this describes how you will create a new repository.


First, you will need to clone the gitolite-admin repository
First, you will need to clone the gitolite-admin repository
Line 70: Line 66:
would create a new repository at git@code.communitydata.science:foo with aaron and mako as admins, and give jdfoote read-only access *once this file was saved, committed, and pushed*.
would create a new repository at git@code.communitydata.science:foo with aaron and mako as admins, and give jdfoote read-only access *once this file was saved, committed, and pushed*.


That means you need to:
In order to actually create the repository you need to:


# Save the file (i.e., with text editor)
# Save the file (i.e., with text editor)
# Add the file with (with <code>git add conf/gitolite.conf</code>)
# Add the file with (with <code>git add conf/gitolite.conf</code>)
# Commit the file (with <code>git commit</code>) (this will throw you in vi/vim)
# Commit the file (with <code>git commit</code>) (this will put you into a text editor where you can add a commit message)
# Push the file back to the server (with <code>git push</code>)
# Push the file back to the server (with <code>git push</code>)


Line 83: Line 79:
$ cd foo
$ cd foo
$ git remote add origin git@code.communitydata.science:foo
$ git remote add origin git@code.communitydata.science:foo
$ git push --set-upstream origin master
$ git push --set-upstream origin main
</source>
</source>


Line 101: Line 97:
{{note}} This is still experimental, and may go away. Don't put files in it without a backup.
{{note}} This is still experimental, and may go away. Don't put files in it without a backup.


Git is not a very good system for managing large files, which is a problem for us, since we often have large data files. Enter [https://git-annex.branchable.com/walkthrough/ git-annex], a system that works in tandem with git and lets you store large files (but avoids using git as the data store). Our gitolite installation supports git-annex. To start using git-annex, install git-annex locally in your computer. Most GNU/Linux distributions have git-annex packages. Then, in your existing git repository execute the following initialization command:
=== Getting Set Up ===
 
Git is not a very good system for managing large files, which is a problem for us, since we often have large data files. Enter [https://git-annex.branchable.com/walkthrough/ git-annex], a system that works in tandem with git and lets you store large files (but avoids using git as the data store). Our gitolite installation supports git-annex. To start using git-annex, install git-annex locally in your computer. Most GNU/Linux distributions have git-annex packages. If you're on a Mac, in Terminal.app, try the instructions from Homebrew: https://formulae.brew.sh/formula/git-annex.
 
=== Setting Up Your Repo To Use Annex ===
Then, in your existing git repository execute the following initialization command:
    
    
<source lang='bash'>
<source lang='bash'>
Line 122: Line 123:
$ git annex copy --to origin
$ git annex copy --to origin
</source>
</source>
=== Using an Existing Annex Repo ===
Once these commands are successful, your collaborators should be able to get the file with the following command (assuming that they have already run <code>git annex init</code>):
Once these commands are successful, your collaborators should be able to get the file with the following command (assuming that they have already run <code>git annex init</code>):



Latest revision as of 20:35, 1 December 2023

Wondering why this is a topic to care about? Check this what is version control? article.

Getting Access to the CDSC Git Repository[edit]

If you need access to the CDSC Git Repository, you should ask on the #communitydata IRC channel for access. If you need access to a specific repository only, mention which one. While you likely already know which repo you want access to, you can find the public ones on code.communitydata.science, and a complete list of all of them conf/gitolite.conf file in the gitolite-admin git repository. If you are a new CDSC member, mention that you need to be added to the @collective group in Gitolite. Anybody in the collective who uses the Git repository will be able add you.

Install Git[edit]

To get started, you will need to install git. Doing so requires different steps depending on your operating system. Basic instructions available from the Git website.

You will also likely need to set it up so it knows what your name and email address is. You can do that like:

$ git config --global user.name "John Doe"
$ git config --global user.email johndoe@example.com
Again

Note that RStudio also has Git integration now. Instructions and details available via RStudio support documentation.

Configuring Git for submodules[edit]

Once you've installed git, there are some configuration options which will make your life much easier. You can set them globally with the following commands:

git config --global alias.spull '!__git_spull() { git pull "$@" && git submodule sync --recursive && git submodule update --init --recursive; }; __git_spull'
git config --global status.submoduleSummary true

These two commands will ensure that git works a little better with submodules. Submodules are essentially git repositories that are buried inside other git repositories. For example, the wikiresearch repository currently uses the RCommunityData repository as a submodule. If you're working in a repository like this, you'll want to use git spull instead of just git pull which will also check for and pull changes made in any of your submodules.

Gitolite Server[edit]

We have a private git server which uses gitolite to manage permissions for git repositories. It's like a private Github server that hosts our respositories, but just ours, and on our server.

SSH Keys[edit]

Once you've got git installed, you will also need a public SSH key. You can send your public key (usually ~/.ssh/id_rsa.pub) to a current administrator (see the list of administrators below on this page), and they can add you as a new user.

Cloning a repository[edit]

"Cloning" a repository downloads the files, as well as the history, of a repository. It also creates a new git instance in that directory, so that you can commit changes to the code.

To clone a repository, run the following command:

 git clone --recursive git@code.communitydata.science:REPOSITORY_NAME

Note that you need to use this SSH syntax rather than the git protocol (e.g., git://code.communitydata.science/repo_name), which doesn't have write permissions.

Creating a new repository[edit]

To create a new repository, you will need to have admin rights. Currently, everyone in the collective group is an administrator.

First, you will need to clone the gitolite-admin repository

$ git clone git@code.communitydata.science:gitolite-admin

And then edit the file conf/gitolite.conf. To add a new project, simply create a new entry at the bottom of the file.

For example,

repo foo
    RW+ = aaron mako
    R   = jdfoote

would create a new repository at git@code.communitydata.science:foo with aaron and mako as admins, and give jdfoote read-only access *once this file was saved, committed, and pushed*.

In order to actually create the repository you need to:

  1. Save the file (i.e., with text editor)
  2. Add the file with (with git add conf/gitolite.conf)
  3. Commit the file (with git commit) (this will put you into a text editor where you can add a commit message)
  4. Push the file back to the server (with git push)

Pushing data into a new repository on the server from a local git repository you already have[edit]

You could then go to wherever the files are that you would like to track, and add this repository as a remote, like so:

$ cd foo
$ git remote add origin git@code.communitydata.science:foo
$ git push --set-upstream origin main

If this project already exists in git, then it's even easier. Just change the remote, and push it.

$ git remote set-url origin git@code.communitydata.science:foo
$ git push

Adding new users[edit]

To add new users, simply add their public key to the keydir/ directory, renamed as username.pub. The persons username (as called in the code/gitolite.conf file) will be whatever the username in the filename above is.

Using git-annex to manage large files in git[edit]

Note Note: This is still experimental, and may go away. Don't put files in it without a backup.

Getting Set Up[edit]

Git is not a very good system for managing large files, which is a problem for us, since we often have large data files. Enter git-annex, a system that works in tandem with git and lets you store large files (but avoids using git as the data store). Our gitolite installation supports git-annex. To start using git-annex, install git-annex locally in your computer. Most GNU/Linux distributions have git-annex packages. If you're on a Mac, in Terminal.app, try the instructions from Homebrew: https://formulae.brew.sh/formula/git-annex.

Setting Up Your Repo To Use Annex[edit]

Then, in your existing git repository execute the following initialization command:

$ git annex init

This needs to be done only once. To add a file, in your repository, run the following commands:

$ mkdir data
$ cp ~/largedata.csv.bz2 data/

You should encrypt the file if the data is not public. You can use GNU Privacy Guard to do the encryption, and have all your collaborators as recipients for the file. Once encrypted, execute the following commands to include and push the file to the server.

$ git annex add data/largedata.csv.bz2.gpg
$ git commit -m "Added data file"
$ git push --all
$ git annex copy --to origin

Using an Existing Annex Repo[edit]

Once these commands are successful, your collaborators should be able to get the file with the following command (assuming that they have already run git annex init):

$ git annex get data/largedata.csv.bz2.gpg

Once you've encrypted non-public data, git-annex is easy to use using the webapp.

$ git annex webapp